提交git忽略文件

杨甜甜
1 parent 149f15b6
Showing 3 changed files with 403 additions and 0 deletions Show diff stats
.gitattributes
.gitignore
EduResearch/.vs/QuestionJindu/v16/.suo
@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain
@@ -0,0 +1,340 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+##
+## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
+
+# User-specific files
+*.rsuser
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+[Aa][Rr][Mm]/
+[Aa][Rr][Mm]64/
+bld/
+[Bb]in/
+[Oo]bj/
+[Ll]og/
+
+# Visual Studio 2015/2017 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# Visual Studio 2017 auto generated files
+Generated\ Files/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUNIT
+*.VisualState.xml
+TestResult.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# Benchmark Results
+BenchmarkDotNet.Artifacts/
+
+# .NET Core
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+# StyleCop
+StyleCopReport.xml
+
+# Files built by Visual Studio
+*_i.c
+*_p.c
+*_h.h
+*.ilk
+*.meta
+*.obj
+*.iobj
+*.pch
+*.pdb
+*.ipdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*_wpftmp.csproj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# Visual Studio Trace Files
+*.e2e
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# JustCode is a .NET coding add-in
+.JustCode
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# AxoCover is a Code Coverage Tool
+.axoCover/*
+!.axoCover/settings.json
+
+# Visual Studio code coverage results
+*.coverage
+*.coveragexml
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# Note: Comment the next line if you want to checkin your web deploy settings,
+# but database connection strings (with potential passwords) will be unencrypted
+*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# The packages folder can be ignored because of Package Restore
+**/[Pp]ackages/*
+# except build/, which is used as an MSBuild target.
+!**/[Pp]ackages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/[Pp]ackages/repositories.config
+# NuGet v3's project.json files produces more ignorable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+*.appx
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!?*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+orleans.codegen.cs
+
+# Including strong name files can present a security risk
+# (https://github.com/github/gitignore/pull/2483#issue-259490424)
+#*.snk
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+ServiceFabricBackup/
+*.rptproj.bak
+
+# SQL Server files
+*.mdf
+*.ldf
+*.ndf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+*.rptproj.rsuser
+*- Backup*.rdl
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+node_modules/
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
+*.vbw
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# JetBrains Rider
+.idea/
+*.sln.iml
+
+# CodeRush personal settings
+.cr/personal
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc
+
+# Cake - Uncomment if you are using it
+# tools/**
+# !tools/packages.config
+
+# Tabs Studio
+*.tss
+
+# Telerik's JustMock configuration file
+*.jmconfig
+
+# BizTalk build output
+*.btp.cs
+*.btm.cs
+*.odx.cs
+*.xsd.cs
+
+# OpenCover UI analysis results
+OpenCover/
+
+# Azure Stream Analytics local run output
+ASALocalRun/
+
+# MSBuild Binary and Structured Log
+*.binlog
+
+# NVidia Nsight GPU debugger configuration file
+*.nvuser
+
+# MFractors (Xamarin productivity tool) working folder
+.mfractor/
+
+# Local History for Visual Studio
+.localhistory/
+
+# BeatPulse healthcheck temp database
+healthchecksdb
 \ No newline at end of file
...	...	@@ -0,0 +1,63 @@
	1	+###############################################################################
	2	+# Set default behavior to automatically normalize line endings.
	3	+###############################################################################
	4	+* text=auto
	5	+
	6	+###############################################################################
	7	+# Set default behavior for command prompt diff.
	8	+#
	9	+# This is need for earlier builds of msysgit that does not have it on by
	10	+# default for csharp files.
	11	+# Note: This is only used by command line
	12	+###############################################################################
	13	+#*.cs diff=csharp
	14	+
	15	+###############################################################################
	16	+# Set the merge driver for project and solution files
	17	+#
	18	+# Merging from the command prompt will add diff markers to the files if there
	19	+# are conflicts (Merging from VS is not affected by the settings below, in VS
	20	+# the diff markers are never inserted). Diff markers may cause the following
	21	+# file extensions to fail to load in VS. An alternative would be to treat
	22	+# these files as binary and thus will always conflict and require user
	23	+# intervention with every merge. To do so, just uncomment the entries below
	24	+###############################################################################
	25	+#*.sln merge=binary
	26	+#*.csproj merge=binary
	27	+#*.vbproj merge=binary
	28	+#*.vcxproj merge=binary
	29	+#*.vcproj merge=binary
	30	+#*.dbproj merge=binary
	31	+#*.fsproj merge=binary
	32	+#*.lsproj merge=binary
	33	+#*.wixproj merge=binary
	34	+#*.modelproj merge=binary
	35	+#*.sqlproj merge=binary
	36	+#*.wwaproj merge=binary
	37	+
	38	+###############################################################################
	39	+# behavior for image files
	40	+#
	41	+# image files are treated as binary by default.
	42	+###############################################################################
	43	+#*.jpg binary
	44	+#*.png binary
	45	+#*.gif binary
	46	+
	47	+###############################################################################
	48	+# diff behavior for common document formats
	49	+#
	50	+# Convert binary document formats to text before diffing them. This feature
	51	+# is only available from the command line. Turn it on by uncommenting the
	52	+# entries below.
	53	+###############################################################################
	54	+#*.doc diff=astextplain
	55	+#*.DOC diff=astextplain
	56	+#*.docx diff=astextplain
	57	+#*.DOCX diff=astextplain
	58	+#*.dot diff=astextplain
	59	+#*.DOT diff=astextplain
	60	+#*.pdf diff=astextplain
	61	+#*.PDF diff=astextplain
	62	+#*.rtf diff=astextplain
	63	+#*.RTF diff=astextplain
...	...
...	...	@@ -0,0 +1,340 @@
	1	+## Ignore Visual Studio temporary files, build results, and
	2	+## files generated by popular Visual Studio add-ons.
	3	+##
	4	+## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
	5	+
	6	+# User-specific files
	7	+*.rsuser
	8	+*.suo
	9	+*.user
	10	+*.userosscache
	11	+*.sln.docstates
	12	+
	13	+# User-specific files (MonoDevelop/Xamarin Studio)
	14	+*.userprefs
	15	+
	16	+# Build results
	17	+[Dd]ebug/
	18	+[Dd]ebugPublic/
	19	+[Rr]elease/
	20	+[Rr]eleases/
	21	+x64/
	22	+x86/
	23	+[Aa][Rr][Mm]/
	24	+[Aa][Rr][Mm]64/
	25	+bld/
	26	+[Bb]in/
	27	+[Oo]bj/
	28	+[Ll]og/
	29	+
	30	+# Visual Studio 2015/2017 cache/options directory
	31	+.vs/
	32	+# Uncomment if you have tasks that create the project's static files in wwwroot
	33	+#wwwroot/
	34	+
	35	+# Visual Studio 2017 auto generated files
	36	+Generated\ Files/
	37	+
	38	+# MSTest test Results
	39	+[Tt]est[Rr]esult*/
	40	+[Bb]uild[Ll]og.*
	41	+
	42	+# NUNIT
	43	+*.VisualState.xml
	44	+TestResult.xml
	45	+
	46	+# Build Results of an ATL Project
	47	+[Dd]ebugPS/
	48	+[Rr]eleasePS/
	49	+dlldata.c
	50	+
	51	+# Benchmark Results
	52	+BenchmarkDotNet.Artifacts/
	53	+
	54	+# .NET Core
	55	+project.lock.json
	56	+project.fragment.lock.json
	57	+artifacts/
	58	+
	59	+# StyleCop
	60	+StyleCopReport.xml
	61	+
	62	+# Files built by Visual Studio
	63	+*_i.c
	64	+*_p.c
	65	+*_h.h
	66	+*.ilk
	67	+*.meta
	68	+*.obj
	69	+*.iobj
	70	+*.pch
	71	+*.pdb
	72	+*.ipdb
	73	+*.pgc
	74	+*.pgd
	75	+*.rsp
	76	+*.sbr
	77	+*.tlb
	78	+*.tli
	79	+*.tlh
	80	+*.tmp
	81	+*.tmp_proj
	82	+*_wpftmp.csproj
	83	+*.log
	84	+*.vspscc
	85	+*.vssscc
	86	+.builds
	87	+*.pidb
	88	+*.svclog
	89	+*.scc
	90	+
	91	+# Chutzpah Test files
	92	+_Chutzpah*
	93	+
	94	+# Visual C++ cache files
	95	+ipch/
	96	+*.aps
	97	+*.ncb
	98	+*.opendb
	99	+*.opensdf
	100	+*.sdf
	101	+*.cachefile
	102	+*.VC.db
	103	+*.VC.VC.opendb
	104	+
	105	+# Visual Studio profiler
	106	+*.psess
	107	+*.vsp
	108	+*.vspx
	109	+*.sap
	110	+
	111	+# Visual Studio Trace Files
	112	+*.e2e
	113	+
	114	+# TFS 2012 Local Workspace
	115	+$tf/
	116	+
	117	+# Guidance Automation Toolkit
	118	+*.gpState
	119	+
	120	+# ReSharper is a .NET coding add-in
	121	+_ReSharper*/
	122	+*.[Rr]e[Ss]harper
	123	+*.DotSettings.user
	124	+
	125	+# JustCode is a .NET coding add-in
	126	+.JustCode
	127	+
	128	+# TeamCity is a build add-in
	129	+_TeamCity*
	130	+
	131	+# DotCover is a Code Coverage Tool
	132	+*.dotCover
	133	+
	134	+# AxoCover is a Code Coverage Tool
	135	+.axoCover/*
	136	+!.axoCover/settings.json
	137	+
	138	+# Visual Studio code coverage results
	139	+*.coverage
	140	+*.coveragexml
	141	+
	142	+# NCrunch
	143	+_NCrunch_*
	144	+.crunch.local.xml
	145	+nCrunchTemp_*
	146	+
	147	+# MightyMoose
	148	+.mm.
	149	+AutoTest.Net/
	150	+
	151	+# Web workbench (sass)
	152	+.sass-cache/
	153	+
	154	+# Installshield output folder
	155	+[Ee]xpress/
	156	+
	157	+# DocProject is a documentation generator add-in
	158	+DocProject/buildhelp/
	159	+DocProject/Help/*.HxT
	160	+DocProject/Help/*.HxC
	161	+DocProject/Help/*.hhc
	162	+DocProject/Help/*.hhk
	163	+DocProject/Help/*.hhp
	164	+DocProject/Help/Html2
	165	+DocProject/Help/html
	166	+
	167	+# Click-Once directory
	168	+publish/
	169	+
	170	+# Publish Web Output
	171	+*.[Pp]ublish.xml
	172	+*.azurePubxml
	173	+# Note: Comment the next line if you want to checkin your web deploy settings,
	174	+# but database connection strings (with potential passwords) will be unencrypted
	175	+*.pubxml
	176	+*.publishproj
	177	+
	178	+# Microsoft Azure Web App publish settings. Comment the next line if you want to
	179	+# checkin your Azure Web App publish settings, but sensitive information contained
	180	+# in these scripts will be unencrypted
	181	+PublishScripts/
	182	+
	183	+# NuGet Packages
	184	+*.nupkg
	185	+# The packages folder can be ignored because of Package Restore
	186	+*/[Pp]ackages/
	187	+# except build/, which is used as an MSBuild target.
	188	+!**/[Pp]ackages/build/
	189	+# Uncomment if necessary however generally it will be regenerated when needed
	190	+#!**/[Pp]ackages/repositories.config
	191	+# NuGet v3's project.json files produces more ignorable files
	192	+*.nuget.props
	193	+*.nuget.targets
	194	+
	195	+# Microsoft Azure Build Output
	196	+csx/
	197	+*.build.csdef
	198	+
	199	+# Microsoft Azure Emulator
	200	+ecf/
	201	+rcf/
	202	+
	203	+# Windows Store app package directories and files
	204	+AppPackages/
	205	+BundleArtifacts/
	206	+Package.StoreAssociation.xml
	207	+_pkginfo.txt
	208	+*.appx
	209	+
	210	+# Visual Studio cache files
	211	+# files ending in .cache can be ignored
	212	+*.[Cc]ache
	213	+# but keep track of directories ending in .cache
	214	+!?*.[Cc]ache/
	215	+
	216	+# Others
	217	+ClientBin/
	218	+~$*
	219	+*~
	220	+*.dbmdl
	221	+*.dbproj.schemaview
	222	+*.jfm
	223	+*.pfx
	224	+*.publishsettings
	225	+orleans.codegen.cs
	226	+
	227	+# Including strong name files can present a security risk
	228	+# (https://github.com/github/gitignore/pull/2483#issue-259490424)
	229	+#*.snk
	230	+
	231	+# Since there are multiple workflows, uncomment next line to ignore bower_components
	232	+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
	233	+#bower_components/
	234	+
	235	+# RIA/Silverlight projects
	236	+Generated_Code/
	237	+
	238	+# Backup & report files from converting an old project file
	239	+# to a newer Visual Studio version. Backup files are not needed,
	240	+# because we have git ;-)
	241	+_UpgradeReport_Files/
	242	+Backup*/
	243	+UpgradeLog*.XML
	244	+UpgradeLog*.htm
	245	+ServiceFabricBackup/
	246	+*.rptproj.bak
	247	+
	248	+# SQL Server files
	249	+*.mdf
	250	+*.ldf
	251	+*.ndf
	252	+
	253	+# Business Intelligence projects
	254	+*.rdl.data
	255	+*.bim.layout
	256	+.bim_.settings
	257	+*.rptproj.rsuser
	258	+- Backup.rdl
	259	+
	260	+# Microsoft Fakes
	261	+FakesAssemblies/
	262	+
	263	+# GhostDoc plugin setting file
	264	+*.GhostDoc.xml
	265	+
	266	+# Node.js Tools for Visual Studio
	267	+.ntvs_analysis.dat
	268	+node_modules/
	269	+
	270	+# Visual Studio 6 build log
	271	+*.plg
	272	+
	273	+# Visual Studio 6 workspace options file
	274	+*.opt
	275	+
	276	+# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
	277	+*.vbw
	278	+
	279	+# Visual Studio LightSwitch build output
	280	+*/.HTMLClient/GeneratedArtifacts
	281	+*/.DesktopClient/GeneratedArtifacts
	282	+*/.DesktopClient/ModelManifest.xml
	283	+*/.Server/GeneratedArtifacts
	284	+*/.Server/ModelManifest.xml
	285	+_Pvt_Extensions
	286	+
	287	+# Paket dependency manager
	288	+.paket/paket.exe
	289	+paket-files/
	290	+
	291	+# FAKE - F# Make
	292	+.fake/
	293	+
	294	+# JetBrains Rider
	295	+.idea/
	296	+*.sln.iml
	297	+
	298	+# CodeRush personal settings
	299	+.cr/personal
	300	+
	301	+# Python Tools for Visual Studio (PTVS)
	302	+__pycache__/
	303	+*.pyc
	304	+
	305	+# Cake - Uncomment if you are using it
	306	+# tools/**
	307	+# !tools/packages.config
	308	+
	309	+# Tabs Studio
	310	+*.tss
	311	+
	312	+# Telerik's JustMock configuration file
	313	+*.jmconfig
	314	+
	315	+# BizTalk build output
	316	+*.btp.cs
	317	+*.btm.cs
	318	+*.odx.cs
	319	+*.xsd.cs
	320	+
	321	+# OpenCover UI analysis results
	322	+OpenCover/
	323	+
	324	+# Azure Stream Analytics local run output
	325	+ASALocalRun/
	326	+
	327	+# MSBuild Binary and Structured Log
	328	+*.binlog
	329	+
	330	+# NVidia Nsight GPU debugger configuration file
	331	+*.nvuser
	332	+
	333	+# MFractors (Xamarin productivity tool) working folder
	334	+.mfractor/
	335	+
	336	+# Local History for Visual Studio
	337	+.localhistory/
	338	+
	339	+# BeatPulse healthcheck temp database
	340	+healthchecksdb
0	341	\ No newline at end of file
...	...